New Designer line of male chastity belts. No two products are identical in design. Each one has its own special look in either Camouflage, Chrome or Wood Finish!
The Innovative ring design consists of three interlocking pieces that fit together like puzzle pieces. The two guide pins hold the top pieces together. The locking pin goes through the middle recessed hole connecting the cage portion to the ring. The new flat design is extremely comfortable. The rings come in 5 sizes: 1.5 inch, 1.625 inch, 1.75 inch, 1.875 inch and 2 inch inside diameter. The cage length is 3.25 inches with an inside diameter of 1.375 inches.
Polycarbonate material is used due to its light weight and durability. The cage portion has the vented slots for hygiene and also allows for natural air drying. The bottom opening allows for use at the urinals. You may want to have a piece of tissue handy to wipe any drips.
Make sure to wear a numbered plastic lock if going through any metal detectors. It has been reported that some men have worn the brass padlock and have not had any "alarming" experiences, however, the plastic lock is still recommended.
We highly recommend using a silicone based lubricant after showering. This allows the penis to naturally move up and down in the cage portion. After a break in time period you should be able to wear it for 24/7 for an indefinite period of time, 1 month, 3 months, wearer and Keyholder ultimately determine the length of time.
Each Order includes the following:
- One Cage Portion.
- Five different sized rings.
- Four locking pins.
- Four spacers.
- One brass padlock with ONE key.
- Five individually numbered plastic locks.
- An embossed CB-6000 zipper pouch.
Other A.L. Enterprises Male Chastity Belts include: the CB-3000, CB-6000, CB-6000s, the CB-300 Curve, and the PA-5000 (made to accept Prince Albert Piercings).
What is a chastity belt?
Chastity belts are locking devices (or clothing) that are designed to prevent intercourse and rape. The first known interpreted mention of such devices can be dated back to the 1400's in a book describing military technology in that particular era. In modern times, chastity belts are commonly used by BDSM (bondage and discipline/sadism and masochism) enthusiasts for dominance play as well as preventing masturbation and infidelity. In BDSM play a chastity belt is worn to surrender control over ones sexual behavior.
Female chastity belts have flat band or strip of leather (this is referred to as the shield) that covers the vagina with only a slot for the labia to protrude to allow the wearer to urinate. Some female chastity devices have a perforated cover over this slot to prevent pinching or discomfort. This shield is attached to a harness be means of metal snaps or rivets, and ultimately held on by a belt with locking clasp or buckle.
Although the first devices were female chastity belts, male chastity belts (or male chastity devices may be a better way of putting it) are becoming more and more common. For male chastity belts, the shield is usually a tube which covers the penis while facing downwards. The tube connects and locks to a ring that is fit specifically to the wearer. Depending on the device, the tube is made of several different materials.
The Bon-4 Male Chastity Belt (the newest male chastity device) is the first silicone chastity belt manufactured.
